The MRA is capable of steering its beam into three different directions (èi = -30 degrees , 0 degrees , 30 degrees ) simultaneously with polarization reconfigurability (Pj = Linear, Circular) having six different modes of operation. The MRA consists of a driven microstrip-fed patch element and a reconfigurable parasitic layer, and is designed to be compatible with IEEE-802.11 WLAN standards (5-6 GHz range). The parasitic layer is placed on top of the driven patch. The upper surface of the parasitic layer has a grid of 5 5 electrically small rectangular-shaped metallic pixels, i.e., reconfigurable parasitic pixel surface. The EM energy from the driven patch element couples to the reconfigurable parasitic pixel surface by mutual coupling. The adjacent pixels are connected/disconnected by means of switching, thereby changing the geometry of pixel surface, which, in turn, changes the current distribution over the parasitic layer, resulting in the desired mode of operation in beam direction and polarization. A prototype of the designed MRA has been fabricated on quartz substrate. The results from simulations and measurements agree well, indicating ~8 dB gain in all modes of operation. (Publisher abstract modified)
Downloads
Similar Publications
- The Multi-site Evaluation of the Serious and Violent Offender Reentry Initiative Characteristics of Prisoner Reentry Programs for Juveniles
- Analysis of Coordinated Denial-of-Service Attacks in IEEE 802.22 Networks
- Demonstration of a mitochondrial DNA-compatible workflow for genetically variant peptide identification from human hair samples